1994 Chevrolet Camaro — Z28 Convertible

The 1994 Chevrolet Camaro Z28 Convertible shipped with 2 different factory tire sizes, depending on the wheel package it left the factory with (this can also reflect a staggered front/rear setup). Check your tire sidewall or door placard to confirm which one applies to your vehicle.

This trim shipped with more than one tire size (staggered fitment, front/rear, or optional wheel package). Confirm which one matches your vehicle by checking your tire sidewall or door placard.

235/55R16

Section width235 mm
Aspect ratio (sidewall height)55% (129.3 mm)
Rim diameter16"
Overall tire diameter~26.2"
Revolutions per mile~770

Compare prices at:

245/50R16

Section width245 mm
Aspect ratio (sidewall height)50% (122.5 mm)
Rim diameter16"
Overall tire diameter~25.6"
Revolutions per mile~786

Compare prices at:

What this size means for your Chevrolet Camaro

On the 1994 Chevrolet Camaro Z28 Convertible, the factory 235/55R16 measures about 26.2″ in overall diameter with a 129.3 mm (5.1″) sidewall, and completes roughly 770 revolutions per mile. Its 55-series aspect ratio gives a balanced everyday-passenger profile — enough sidewall to soak up road shock while keeping steering response crisp. In tire terms it is a passenger (P-metric / Euro-metric) size.

The 235/55R16 and 245/50R16 differ in both width and overall diameter (0.6″, 2.3%), which usually means a staggered front/rear setup — the two sizes are not interchangeable side to side, so match each to its correct axle.

Because the 1994 Chevrolet Camaro predates many current tire lines, confirm this size is still stocked before ordering — some vintage fitments are now served mainly by specialty and classic-car tire suppliers.

Other 1994 Chevrolet Camaro trims

Chevrolet Camaro tire sizes by year

See every Chevrolet Camaro year & trim →

How to read a tire size

A tire size like 225/45R17 breaks down into three parts: the first number is the section width in millimeters (the tire's width from sidewall to sidewall), the second is the aspect ratio — the sidewall's height as a percentage of that width — and the number after the "R" is the rim diameter in inches. A letter prefix (P or LT) indicates Passenger or Light Truck construction; its absence usually means Euro-metric sizing.

Some trucks and off-road tires instead use "flotation" sizing, like 37X12.50R17 — here the numbers are the tire's overall diameter and width in inches directly, with the rim diameter last.

Always verify against the tire information placard on your driver's-side door jamb or your owner's manual before purchasing — tire size can vary by factory option package even within the same trim.