1999 Chevrolet Camaro — Z28

The 1999 Chevrolet Camaro Z28 shipped with 2 different factory tire sizes, depending on the wheel package it left the factory with (this can also reflect a staggered front/rear setup). Check your tire sidewall or door placard to confirm which one applies to your vehicle.

This trim shipped with more than one tire size (staggered fitment, front/rear, or optional wheel package). Confirm which one matches your vehicle by checking your tire sidewall or door placard.

235/55R16

Section width235 mm
Aspect ratio (sidewall height)55% (129.3 mm)
Rim diameter16"
Overall tire diameter~26.2"
Revolutions per mile~770

Compare prices at:

245/50R16

Section width245 mm
Aspect ratio (sidewall height)50% (122.5 mm)
Rim diameter16"
Overall tire diameter~25.6"
Revolutions per mile~786

Compare prices at:

What this size means for your Chevrolet Camaro

On the 1999 Chevrolet Camaro Z28, the factory 235/55R16 measures about 26.2″ in overall diameter with a 129.3 mm (5.1″) sidewall, and completes roughly 770 revolutions per mile. Its 55-series aspect ratio gives a balanced everyday-passenger profile — enough sidewall to soak up road shock while keeping steering response crisp. In tire terms it is a passenger (P-metric / Euro-metric) size.

The 235/55R16 and 245/50R16 differ in both width and overall diameter (0.6″, 2.3%), which usually means a staggered front/rear setup — the two sizes are not interchangeable side to side, so match each to its correct axle.

On a vehicle of this age, the Chevrolet Camaro may have been refitted with a slightly different replacement size somewhere in its life, so check the current sidewall — not just the factory spec — before buying.

Other 1999 Chevrolet Camaro trims

Chevrolet Camaro tire sizes by year

See every Chevrolet Camaro year & trim →

How to read a tire size

A tire size like 225/45R17 breaks down into three parts: the first number is the section width in millimeters (the tire's width from sidewall to sidewall), the second is the aspect ratio — the sidewall's height as a percentage of that width — and the number after the "R" is the rim diameter in inches. A letter prefix (P or LT) indicates Passenger or Light Truck construction; its absence usually means Euro-metric sizing.

Some trucks and off-road tires instead use "flotation" sizing, like 37X12.50R17 — here the numbers are the tire's overall diameter and width in inches directly, with the rim diameter last.

Always verify against the tire information placard on your driver's-side door jamb or your owner's manual before purchasing — tire size can vary by factory option package even within the same trim.