2010 Chevrolet Camaro — LS

The 2010 Chevrolet Camaro LS shipped with 3 different factory tire sizes, depending on the wheel package it left the factory with (this can also reflect a staggered front/rear setup). Check your tire sidewall or door placard to confirm which one applies to your vehicle.

This trim shipped with more than one tire size (staggered fitment, front/rear, or optional wheel package). Confirm which one matches your vehicle by checking your tire sidewall or door placard.

245/55R18

Section width245 mm
Aspect ratio (sidewall height)55% (134.8 mm)
Rim diameter18"
Overall tire diameter~28.6"
Revolutions per mile~705

Compare prices at:

245/40R21 (Front)

Section width245 mm
Aspect ratio (sidewall height)40% (98 mm)
Rim diameter21"
Overall tire diameter~28.7"
Revolutions per mile~702

Compare prices at:

275/35R21 (Rear)

Section width275 mm
Aspect ratio (sidewall height)35% (96.3 mm)
Rim diameter21"
Overall tire diameter~28.6"
Revolutions per mile~706

Compare prices at:

What this size means for your Chevrolet Camaro

On the 2010 Chevrolet Camaro LS, the factory 245/55R18 measures about 28.6″ in overall diameter with a 134.8 mm (5.3″) sidewall, and completes roughly 705 revolutions per mile. Its 55-series aspect ratio gives a balanced everyday-passenger profile — enough sidewall to soak up road shock while keeping steering response crisp. In tire terms it is a passenger (P-metric / Euro-metric) size.

The 245/55R18 and 245/40R21 roll within 0.1″ (0.3%) of each other in overall diameter, so they are interchangeable from a speedometer standpoint — the second size is an optional wheel package rather than a different rolling size.

On a vehicle of this age, the Chevrolet Camaro may have been refitted with a slightly different replacement size somewhere in its life, so check the current sidewall — not just the factory spec — before buying.

Other 2010 Chevrolet Camaro trims

Chevrolet Camaro tire sizes by year

See every Chevrolet Camaro year & trim →

How to read a tire size

A tire size like 225/45R17 breaks down into three parts: the first number is the section width in millimeters (the tire's width from sidewall to sidewall), the second is the aspect ratio — the sidewall's height as a percentage of that width — and the number after the "R" is the rim diameter in inches. A letter prefix (P or LT) indicates Passenger or Light Truck construction; its absence usually means Euro-metric sizing.

Some trucks and off-road tires instead use "flotation" sizing, like 37X12.50R17 — here the numbers are the tire's overall diameter and width in inches directly, with the rim diameter last.

Always verify against the tire information placard on your driver's-side door jamb or your owner's manual before purchasing — tire size can vary by factory option package even within the same trim.