1994 Chrysler Lebaron — GTC Coupe

The 1994 Chrysler Lebaron GTC Coupe shipped with 2 different factory tire sizes, depending on the wheel package it left the factory with (this can also reflect a staggered front/rear setup). Check your tire sidewall or door placard to confirm which one applies to your vehicle.

This trim shipped with more than one tire size (staggered fitment, front/rear, or optional wheel package). Confirm which one matches your vehicle by checking your tire sidewall or door placard.

205/60R15

Section width205 mm
Aspect ratio (sidewall height)60% (123 mm)
Rim diameter15"
Overall tire diameter~24.7"
Revolutions per mile~817

Compare prices at:

205/55R16

Section width205 mm
Aspect ratio (sidewall height)55% (112.8 mm)
Rim diameter16"
Overall tire diameter~24.9"
Revolutions per mile~811

Compare prices at:

What this size means for your Chrysler Lebaron

On the 1994 Chrysler Lebaron GTC Coupe, the factory 205/60R15 measures about 24.7″ in overall diameter with a 123 mm (4.8″) sidewall, and completes roughly 817 revolutions per mile. Its 60-series aspect ratio gives a taller, comfort-biased sidewall that favors ride quality and shrugs off rough pavement. In tire terms it is a passenger (P-metric / Euro-metric) size.

The 205/60R15 and 205/55R16 roll within 0.2″ (0.8%) of each other in overall diameter, so they are interchangeable from a speedometer standpoint — the second size is an optional wheel package rather than a different rolling size.

Because the 1994 Chrysler Lebaron predates many current tire lines, confirm this size is still stocked before ordering — some vintage fitments are now served mainly by specialty and classic-car tire suppliers.

Other 1994 Chrysler Lebaron trims

Chrysler Lebaron tire sizes by year

See every Chrysler Lebaron year & trim →

How to read a tire size

A tire size like 225/45R17 breaks down into three parts: the first number is the section width in millimeters (the tire's width from sidewall to sidewall), the second is the aspect ratio — the sidewall's height as a percentage of that width — and the number after the "R" is the rim diameter in inches. A letter prefix (P or LT) indicates Passenger or Light Truck construction; its absence usually means Euro-metric sizing.

Some trucks and off-road tires instead use "flotation" sizing, like 37X12.50R17 — here the numbers are the tire's overall diameter and width in inches directly, with the rim diameter last.

Always verify against the tire information placard on your driver's-side door jamb or your owner's manual before purchasing — tire size can vary by factory option package even within the same trim.