2012 Dodge Caliber — SE
The 2012 Dodge Caliber SE shipped with 2 different factory tire sizes, depending on the wheel package it left the factory with (this can also reflect a staggered front/rear setup). Check your tire sidewall or door placard to confirm which one applies to your vehicle.
This trim shipped with more than one tire size (staggered fitment, front/rear, or optional wheel package). Confirm which one matches your vehicle by checking your tire sidewall or door placard.
205/70R15
| Section width | 205 mm |
|---|---|
| Aspect ratio (sidewall height) | 70% (143.5 mm) |
| Rim diameter | 15" |
| Overall tire diameter | ~26.3" |
| Revolutions per mile | ~767 |
Compare prices at:
215/60R17
| Section width | 215 mm |
|---|---|
| Aspect ratio (sidewall height) | 60% (129 mm) |
| Rim diameter | 17" |
| Overall tire diameter | ~27.2" |
| Revolutions per mile | ~743 |
Compare prices at:
What this size means for your Dodge Caliber
On the 2012 Dodge Caliber SE, the factory 205/70R15 measures about 26.3″ in overall diameter with a 143.5 mm (5.6″) sidewall, and completes roughly 767 revolutions per mile. Its 70-series aspect ratio gives a tall sidewall of the kind used on trucks, SUVs, and older passenger cars, built for cushioning and load. In tire terms it is a passenger (P-metric / Euro-metric) size.
The 205/70R15 and 215/60R17 differ in both width and overall diameter (0.9″, 3.4%), which usually means a staggered front/rear setup — the two sizes are not interchangeable side to side, so match each to its correct axle.
Other 2012 Dodge Caliber trims
Dodge Caliber tire sizes by year
- 2011 Dodge Caliber 205/70R15 / 215/60R17
- 2010 Dodge Caliber 205/70R15 / 215/60R17
- 2009 Dodge Caliber 215/55R18
- 2008 Dodge Caliber 215/55R18
- 2007 Dodge Caliber 215/55R18
How to read a tire size
A tire size like 225/45R17 breaks down into three parts:
the first number is the section width in millimeters
(the tire's width from sidewall to sidewall), the second is the
aspect ratio — the sidewall's height as a percentage of
that width — and the number after the "R" is the rim
diameter in inches. A letter prefix (P or LT) indicates
Passenger or Light Truck construction; its absence usually means
Euro-metric sizing.
Some trucks and off-road tires instead use "flotation" sizing, like
37X12.50R17 — here the numbers are the tire's overall
diameter and width in inches directly, with the rim diameter last.
Always verify against the tire information placard on your driver's-side door jamb or your owner's manual before purchasing — tire size can vary by factory option package even within the same trim.