1995 Ferrari F355 — Spider
The 1995 Ferrari F355 Spider shipped with 2 different factory tire sizes, depending on the wheel package it left the factory with (this can also reflect a staggered front/rear setup). Check your tire sidewall or door placard to confirm which one applies to your vehicle.
This trim shipped with more than one tire size (staggered fitment, front/rear, or optional wheel package). Confirm which one matches your vehicle by checking your tire sidewall or door placard.
225/40R18 (Front)
| Section width | 225 mm |
|---|---|
| Aspect ratio (sidewall height) | 40% (90 mm) |
| Rim diameter | 18" |
| Overall tire diameter | ~25.1" |
| Revolutions per mile | ~804 |
Compare prices at:
265/40R18 (Rear)
| Section width | 265 mm |
|---|---|
| Aspect ratio (sidewall height) | 40% (106 mm) |
| Rim diameter | 18" |
| Overall tire diameter | ~26.3" |
| Revolutions per mile | ~765 |
Compare prices at:
What this size means for your Ferrari F355
On the 1995 Ferrari F355 Spider, the factory 225/40R18 measures about 25.1″ in overall diameter with a 90 mm (3.5″) sidewall, and completes roughly 804 revolutions per mile. Its 40-series aspect ratio gives a low-profile sidewall tuned for sharper handling, common on sport trims and larger-wheel packages. In tire terms it is a passenger (P-metric / Euro-metric) size.
This is a staggered setup: the front axle runs 225/40R18 and the rear runs 265/40R18. The two sizes are not interchangeable, so order each for its correct axle and don't rotate front-to-rear.
Because the 1995 Ferrari F355 predates many current tire lines, confirm this size is still stocked before ordering — some vintage fitments are now served mainly by specialty and classic-car tire suppliers.
Other 1995 Ferrari F355 trims
- Berlinetta 225/40R18 (Front) / 265/40R18 (Rear)
- GTS 225/40R18 (Front) / 265/40R18 (Rear)
Ferrari F355 tire sizes by year
- 1999 Ferrari F355 225/40R18 (Front) / 265/40R18 (Rear)
- 1998 Ferrari F355 225/40R18 (Front) / 265/40R18 (Rear)
- 1997 Ferrari F355 225/40R18 (Front) / 265/40R18 (Rear)
- 1996 Ferrari F355 225/40R18 (Front) / 265/40R18 (Rear)
- 1994 Ferrari F355 225/40R18 (Front) / 265/40R18 (Rear)
How to read a tire size
A tire size like 225/45R17 breaks down into three parts:
the first number is the section width in millimeters
(the tire's width from sidewall to sidewall), the second is the
aspect ratio — the sidewall's height as a percentage of
that width — and the number after the "R" is the rim
diameter in inches. A letter prefix (P or LT) indicates
Passenger or Light Truck construction; its absence usually means
Euro-metric sizing.
Some trucks and off-road tires instead use "flotation" sizing, like
37X12.50R17 — here the numbers are the tire's overall
diameter and width in inches directly, with the rim diameter last.
Always verify against the tire information placard on your driver's-side door jamb or your owner's manual before purchasing — tire size can vary by factory option package even within the same trim.