2012 Ferrari FF — Base Model
The 2012 Ferrari FF Base Model shipped with 4 different factory tire sizes, depending on the wheel package it left the factory with (this can also reflect a staggered front/rear setup). Check your tire sidewall or door placard to confirm which one applies to your vehicle.
This trim shipped with more than one tire size (staggered fitment, front/rear, or optional wheel package). Confirm which one matches your vehicle by checking your tire sidewall or door placard.
235/35R20 (Front)
| Section width | 235 mm |
|---|---|
| Aspect ratio (sidewall height) | 35% (82.3 mm) |
| Rim diameter | 20" |
| Overall tire diameter | ~26.5" |
| Revolutions per mile | ~762 |
Compare prices at:
285/35R20 (Rear)
| Section width | 285 mm |
|---|---|
| Aspect ratio (sidewall height) | 35% (99.8 mm) |
| Rim diameter | 20" |
| Overall tire diameter | ~27.9" |
| Revolutions per mile | ~724 |
Compare prices at:
245/35R20 (Front)
| Section width | 245 mm |
|---|---|
| Aspect ratio (sidewall height) | 35% (85.8 mm) |
| Rim diameter | 20" |
| Overall tire diameter | ~26.8" |
| Revolutions per mile | ~754 |
Compare prices at:
295/35R20 (Rear)
| Section width | 295 mm |
|---|---|
| Aspect ratio (sidewall height) | 35% (103.3 mm) |
| Rim diameter | 20" |
| Overall tire diameter | ~28.1" |
| Revolutions per mile | ~717 |
Compare prices at:
What this size means for your Ferrari FF
On the 2012 Ferrari FF Base Model, the factory 235/35R20 measures about 26.5″ in overall diameter with a 82.3 mm (3.2″) sidewall, and completes roughly 762 revolutions per mile. Its 35-series aspect ratio gives an ultra-low-profile, performance-oriented sidewall that favors steering precision over ride cushioning. In tire terms it is a large-diameter fitment.
This is a staggered setup: the front axle runs 235/35R20 and the rear runs 285/35R20. The two sizes are not interchangeable, so order each for its correct axle and don't rotate front-to-rear.
Ferrari FF tire sizes by year
- 2016 Ferrari FF 235/35R20 (Front) / 285/35R20 (Rear) / 245/35R20 (Front) / 295/35R20 (Rear)
- 2015 Ferrari FF 235/35R20 (Front) / 285/35R20 (Rear) / 245/35R20 (Front) / 295/35R20 (Rear)
- 2014 Ferrari FF 235/35R20 (Front) / 285/35R20 (Rear) / 245/35R20 (Front) / 295/35R20 (Rear)
- 2013 Ferrari FF 235/35R20 (Front) / 285/35R20 (Rear) / 245/35R20 (Front) / 295/35R20 (Rear)
How to read a tire size
A tire size like 225/45R17 breaks down into three parts:
the first number is the section width in millimeters
(the tire's width from sidewall to sidewall), the second is the
aspect ratio — the sidewall's height as a percentage of
that width — and the number after the "R" is the rim
diameter in inches. A letter prefix (P or LT) indicates
Passenger or Light Truck construction; its absence usually means
Euro-metric sizing.
Some trucks and off-road tires instead use "flotation" sizing, like
37X12.50R17 — here the numbers are the tire's overall
diameter and width in inches directly, with the rim diameter last.
Always verify against the tire information placard on your driver's-side door jamb or your owner's manual before purchasing — tire size can vary by factory option package even within the same trim.