1996 Ford Probe — Base Model

The 1996 Ford Probe Base Model shipped with 2 different factory tire sizes, depending on the wheel package it left the factory with (this can also reflect a staggered front/rear setup). Check your tire sidewall or door placard to confirm which one applies to your vehicle.

This trim shipped with more than one tire size (staggered fitment, front/rear, or optional wheel package). Confirm which one matches your vehicle by checking your tire sidewall or door placard.

195/65R14

Section width195 mm
Aspect ratio (sidewall height)65% (126.8 mm)
Rim diameter14"
Overall tire diameter~24"
Revolutions per mile~841

Compare prices at:

205/55R15

Section width205 mm
Aspect ratio (sidewall height)55% (112.8 mm)
Rim diameter15"
Overall tire diameter~23.9"
Revolutions per mile~845

Compare prices at:

What this size means for your Ford Probe

On the 1996 Ford Probe Base Model, the factory 195/65R14 measures about 24″ in overall diameter with a 126.8 mm (5″) sidewall, and completes roughly 841 revolutions per mile. Its 65-series aspect ratio gives a taller, comfort-biased sidewall that favors ride quality and shrugs off rough pavement. In tire terms it is a small-diameter fitment typical of older or economy vehicles.

The 195/65R14 and 205/55R15 roll within 0.1″ (0.4%) of each other in overall diameter, so they are interchangeable from a speedometer standpoint — the second size is an optional wheel package rather than a different rolling size.

On a vehicle of this age, the Ford Probe may have been refitted with a slightly different replacement size somewhere in its life, so check the current sidewall — not just the factory spec — before buying.

Other 1996 Ford Probe trims

Ford Probe tire sizes by year

See every Ford Probe year & trim →

How to read a tire size

A tire size like 225/45R17 breaks down into three parts: the first number is the section width in millimeters (the tire's width from sidewall to sidewall), the second is the aspect ratio — the sidewall's height as a percentage of that width — and the number after the "R" is the rim diameter in inches. A letter prefix (P or LT) indicates Passenger or Light Truck construction; its absence usually means Euro-metric sizing.

Some trucks and off-road tires instead use "flotation" sizing, like 37X12.50R17 — here the numbers are the tire's overall diameter and width in inches directly, with the rim diameter last.

Always verify against the tire information placard on your driver's-side door jamb or your owner's manual before purchasing — tire size can vary by factory option package even within the same trim.