1996 Isuzu Hombre — 2wd
The 1996 Isuzu Hombre 2wd shipped with 2 different factory tire sizes, depending on the wheel package it left the factory with (this can also reflect a staggered front/rear setup). Check your tire sidewall or door placard to confirm which one applies to your vehicle.
This trim shipped with more than one tire size (staggered fitment, front/rear, or optional wheel package). Confirm which one matches your vehicle by checking your tire sidewall or door placard.
195/75R14
| Section width | 195 mm |
|---|---|
| Aspect ratio (sidewall height) | 75% (146.3 mm) |
| Rim diameter | 14" |
| Overall tire diameter | ~25.5" |
| Revolutions per mile | ~790 |
Compare prices at:
215/65R15
| Section width | 215 mm |
|---|---|
| Aspect ratio (sidewall height) | 65% (139.8 mm) |
| Rim diameter | 15" |
| Overall tire diameter | ~26" |
| Revolutions per mile | ~776 |
Compare prices at:
What this size means for your Isuzu Hombre
On the 1996 Isuzu Hombre 2wd, the factory 195/75R14 measures about 25.5″ in overall diameter with a 146.3 mm (5.8″) sidewall, and completes roughly 790 revolutions per mile. Its 75-series aspect ratio gives a tall sidewall of the kind used on trucks, SUVs, and older passenger cars, built for cushioning and load. In tire terms it is a small-diameter fitment typical of older or economy vehicles.
The 195/75R14 and 215/65R15 differ in both width and overall diameter (0.5″, 2%), which usually means a staggered front/rear setup — the two sizes are not interchangeable side to side, so match each to its correct axle.
On a vehicle of this age, the Isuzu Hombre may have been refitted with a slightly different replacement size somewhere in its life, so check the current sidewall — not just the factory spec — before buying.
Other 1996 Isuzu Hombre trims
- 4wd 205/75R15 / 235/70R15
Isuzu Hombre tire sizes by year
- 2000 Isuzu Hombre 195/75R14 / 215/65R15
- 1999 Isuzu Hombre 195/75R14 / 215/65R15
- 1998 Isuzu Hombre 195/75R14 / 215/65R15
- 1997 Isuzu Hombre 195/75R14 / 215/65R15
How to read a tire size
A tire size like 225/45R17 breaks down into three parts:
the first number is the section width in millimeters
(the tire's width from sidewall to sidewall), the second is the
aspect ratio — the sidewall's height as a percentage of
that width — and the number after the "R" is the rim
diameter in inches. A letter prefix (P or LT) indicates
Passenger or Light Truck construction; its absence usually means
Euro-metric sizing.
Some trucks and off-road tires instead use "flotation" sizing, like
37X12.50R17 — here the numbers are the tire's overall
diameter and width in inches directly, with the rim diameter last.
Always verify against the tire information placard on your driver's-side door jamb or your owner's manual before purchasing — tire size can vary by factory option package even within the same trim.