2020 Jaguar I-Pace — S
The 2020 Jaguar I-Pace S shipped with 3 different factory tire sizes, depending on the wheel package it left the factory with (this can also reflect a staggered front/rear setup). Check your tire sidewall or door placard to confirm which one applies to your vehicle.
This trim shipped with more than one tire size (staggered fitment, front/rear, or optional wheel package). Confirm which one matches your vehicle by checking your tire sidewall or door placard.
235/65R18
| Section width | 235 mm |
|---|---|
| Aspect ratio (sidewall height) | 65% (152.8 mm) |
| Rim diameter | 18" |
| Overall tire diameter | ~30" |
| Revolutions per mile | ~672 |
Compare prices at:
245/50R20
| Section width | 245 mm |
|---|---|
| Aspect ratio (sidewall height) | 50% (122.5 mm) |
| Rim diameter | 20" |
| Overall tire diameter | ~29.6" |
| Revolutions per mile | ~680 |
Compare prices at:
255/40R22
| Section width | 255 mm |
|---|---|
| Aspect ratio (sidewall height) | 40% (102 mm) |
| Rim diameter | 22" |
| Overall tire diameter | ~30" |
| Revolutions per mile | ~672 |
Compare prices at:
What this size means for your Jaguar I-Pace
On the 2020 Jaguar I-Pace S, the factory 235/65R18 measures about 30″ in overall diameter with a 152.8 mm (6″) sidewall, and completes roughly 672 revolutions per mile. Its 65-series aspect ratio gives a taller, comfort-biased sidewall that favors ride quality and shrugs off rough pavement. In tire terms it is a passenger (P-metric / Euro-metric) size.
The 235/65R18 and 245/50R20 differ in both width and overall diameter (0.4″, 1.4%), which usually means a staggered front/rear setup — the two sizes are not interchangeable side to side, so match each to its correct axle.
Other 2020 Jaguar I-Pace trims
Jaguar I-Pace tire sizes by year
- 2025 Jaguar I-Pace 245/50R20 / 255/40R22
- 2024 Jaguar I-Pace 245/50R20 / 255/40R22
- 2023 Jaguar I-Pace 245/50R20 / 255/40R22
- 2022 Jaguar I-Pace 245/50R20 / 255/40R22
- 2021 Jaguar I-Pace 235/65R18 / 245/50R20 / 255/40R22
- 2019 Jaguar I-Pace 245/50R20 / 255/40R22
How to read a tire size
A tire size like 225/45R17 breaks down into three parts:
the first number is the section width in millimeters
(the tire's width from sidewall to sidewall), the second is the
aspect ratio — the sidewall's height as a percentage of
that width — and the number after the "R" is the rim
diameter in inches. A letter prefix (P or LT) indicates
Passenger or Light Truck construction; its absence usually means
Euro-metric sizing.
Some trucks and off-road tires instead use "flotation" sizing, like
37X12.50R17 — here the numbers are the tire's overall
diameter and width in inches directly, with the rim diameter last.
Always verify against the tire information placard on your driver's-side door jamb or your owner's manual before purchasing — tire size can vary by factory option package even within the same trim.