1996 Mazda B3000 — SE

The 1996 Mazda B3000 SE shipped with 2 different factory tire sizes, depending on the wheel package it left the factory with (this can also reflect a staggered front/rear setup). Check your tire sidewall or door placard to confirm which one applies to your vehicle.

This trim shipped with more than one tire size (staggered fitment, front/rear, or optional wheel package). Confirm which one matches your vehicle by checking your tire sidewall or door placard.

195/70R14

Section width195 mm
Aspect ratio (sidewall height)70% (136.5 mm)
Rim diameter14"
Overall tire diameter~24.7"
Revolutions per mile~815

Compare prices at:

215/70R14

Section width215 mm
Aspect ratio (sidewall height)70% (150.5 mm)
Rim diameter14"
Overall tire diameter~25.9"
Revolutions per mile~780

Compare prices at:

What this size means for your Mazda B3000

On the 1996 Mazda B3000 SE, the factory 195/70R14 measures about 24.7″ in overall diameter with a 136.5 mm (5.4″) sidewall, and completes roughly 815 revolutions per mile. Its 70-series aspect ratio gives a tall sidewall of the kind used on trucks, SUVs, and older passenger cars, built for cushioning and load. In tire terms it is a small-diameter fitment typical of older or economy vehicles.

The 195/70R14 and 215/70R14 differ in both width and overall diameter (1.2″, 4.9%), which usually means a staggered front/rear setup — the two sizes are not interchangeable side to side, so match each to its correct axle.

On a vehicle of this age, the Mazda B3000 may have been refitted with a slightly different replacement size somewhere in its life, so check the current sidewall — not just the factory spec — before buying.

Other 1996 Mazda B3000 trims

Mazda B3000 tire sizes by year

See every Mazda B3000 year & trim →

How to read a tire size

A tire size like 225/45R17 breaks down into three parts: the first number is the section width in millimeters (the tire's width from sidewall to sidewall), the second is the aspect ratio — the sidewall's height as a percentage of that width — and the number after the "R" is the rim diameter in inches. A letter prefix (P or LT) indicates Passenger or Light Truck construction; its absence usually means Euro-metric sizing.

Some trucks and off-road tires instead use "flotation" sizing, like 37X12.50R17 — here the numbers are the tire's overall diameter and width in inches directly, with the rim diameter last.

Always verify against the tire information placard on your driver's-side door jamb or your owner's manual before purchasing — tire size can vary by factory option package even within the same trim.