2007 Mitsubishi Raider — SE
The 2007 Mitsubishi Raider SE shipped with 2 different factory tire sizes, depending on the wheel package it left the factory with (this can also reflect a staggered front/rear setup). Check your tire sidewall or door placard to confirm which one applies to your vehicle.
This trim shipped with more than one tire size (staggered fitment, front/rear, or optional wheel package). Confirm which one matches your vehicle by checking your tire sidewall or door placard.
255/65R16
| Section width | 255 mm |
|---|---|
| Aspect ratio (sidewall height) | 65% (165.8 mm) |
| Rim diameter | 16" |
| Overall tire diameter | ~29.1" |
| Revolutions per mile | ~694 |
Compare prices at:
265/65R17
| Section width | 265 mm |
|---|---|
| Aspect ratio (sidewall height) | 65% (172.3 mm) |
| Rim diameter | 17" |
| Overall tire diameter | ~30.6" |
| Revolutions per mile | ~660 |
Compare prices at:
What this size means for your Mitsubishi Raider
On the 2007 Mitsubishi Raider SE, the factory 255/65R16 measures about 29.1″ in overall diameter with a 165.8 mm (6.5″) sidewall, and completes roughly 694 revolutions per mile. Its 65-series aspect ratio gives a taller, comfort-biased sidewall that favors ride quality and shrugs off rough pavement. In tire terms it is a passenger (P-metric / Euro-metric) size.
The 255/65R16 and 265/65R17 differ in both width and overall diameter (1.5″, 5.2%), which usually means a staggered front/rear setup — the two sizes are not interchangeable side to side, so match each to its correct axle.
On a vehicle of this age, the Mitsubishi Raider may have been refitted with a slightly different replacement size somewhere in its life, so check the current sidewall — not just the factory spec — before buying.
Other 2007 Mitsubishi Raider trims
- Duracross 265/70R16
- LS 2wd Double Cab 255/65R16
- LS 2wd Extended Cab 245/70R16
- LS 4wd Double Cab 265/70R16
Mitsubishi Raider tire sizes by year
- 2009 Mitsubishi Raider 265/70R16
- 2008 Mitsubishi Raider 265/70R16
- 2006 Mitsubishi Raider 265/70R16
How to read a tire size
A tire size like 225/45R17 breaks down into three parts:
the first number is the section width in millimeters
(the tire's width from sidewall to sidewall), the second is the
aspect ratio — the sidewall's height as a percentage of
that width — and the number after the "R" is the rim
diameter in inches. A letter prefix (P or LT) indicates
Passenger or Light Truck construction; its absence usually means
Euro-metric sizing.
Some trucks and off-road tires instead use "flotation" sizing, like
37X12.50R17 — here the numbers are the tire's overall
diameter and width in inches directly, with the rim diameter last.
Always verify against the tire information placard on your driver's-side door jamb or your owner's manual before purchasing — tire size can vary by factory option package even within the same trim.