1996 Oldsmobile Cutlass — Ciera

The 1996 Oldsmobile Cutlass Ciera shipped with 2 different factory tire sizes, depending on the wheel package it left the factory with (this can also reflect a staggered front/rear setup). Check your tire sidewall or door placard to confirm which one applies to your vehicle.

This trim shipped with more than one tire size (staggered fitment, front/rear, or optional wheel package). Confirm which one matches your vehicle by checking your tire sidewall or door placard.

185/75R14

Section width185 mm
Aspect ratio (sidewall height)75% (138.8 mm)
Rim diameter14"
Overall tire diameter~24.9"
Revolutions per mile~809

Compare prices at:

195/75R14

Section width195 mm
Aspect ratio (sidewall height)75% (146.3 mm)
Rim diameter14"
Overall tire diameter~25.5"
Revolutions per mile~790

Compare prices at:

What this size means for your Oldsmobile Cutlass

On the 1996 Oldsmobile Cutlass Ciera, the factory 185/75R14 measures about 24.9″ in overall diameter with a 138.8 mm (5.5″) sidewall, and completes roughly 809 revolutions per mile. Its 75-series aspect ratio gives a tall sidewall of the kind used on trucks, SUVs, and older passenger cars, built for cushioning and load. In tire terms it is a small-diameter fitment typical of older or economy vehicles.

The 185/75R14 and 195/75R14 differ in both width and overall diameter (0.6″, 2.4%), which usually means a staggered front/rear setup — the two sizes are not interchangeable side to side, so match each to its correct axle.

On a vehicle of this age, the Oldsmobile Cutlass may have been refitted with a slightly different replacement size somewhere in its life, so check the current sidewall — not just the factory spec — before buying.

Other 1996 Oldsmobile Cutlass trims

Oldsmobile Cutlass tire sizes by year

See every Oldsmobile Cutlass year & trim →

How to read a tire size

A tire size like 225/45R17 breaks down into three parts: the first number is the section width in millimeters (the tire's width from sidewall to sidewall), the second is the aspect ratio — the sidewall's height as a percentage of that width — and the number after the "R" is the rim diameter in inches. A letter prefix (P or LT) indicates Passenger or Light Truck construction; its absence usually means Euro-metric sizing.

Some trucks and off-road tires instead use "flotation" sizing, like 37X12.50R17 — here the numbers are the tire's overall diameter and width in inches directly, with the rim diameter last.

Always verify against the tire information placard on your driver's-side door jamb or your owner's manual before purchasing — tire size can vary by factory option package even within the same trim.