2012 Toyota Matrix — S AWD
The 2012 Toyota Matrix S AWD shipped with 2 different factory tire sizes, depending on the wheel package it left the factory with (this can also reflect a staggered front/rear setup). Check your tire sidewall or door placard to confirm which one applies to your vehicle.
This trim shipped with more than one tire size (staggered fitment, front/rear, or optional wheel package). Confirm which one matches your vehicle by checking your tire sidewall or door placard.
205/55R16
| Section width | 205 mm |
|---|---|
| Aspect ratio (sidewall height) | 55% (112.8 mm) |
| Rim diameter | 16" |
| Overall tire diameter | ~24.9" |
| Revolutions per mile | ~811 |
Compare prices at:
215/45R17
| Section width | 215 mm |
|---|---|
| Aspect ratio (sidewall height) | 45% (96.8 mm) |
| Rim diameter | 17" |
| Overall tire diameter | ~24.6" |
| Revolutions per mile | ~819 |
Compare prices at:
What this size means for your Toyota Matrix
On the 2012 Toyota Matrix S AWD, the factory 205/55R16 measures about 24.9″ in overall diameter with a 112.8 mm (4.4″) sidewall, and completes roughly 811 revolutions per mile. Its 55-series aspect ratio gives a balanced everyday-passenger profile — enough sidewall to soak up road shock while keeping steering response crisp. In tire terms it is a passenger (P-metric / Euro-metric) size.
The 205/55R16 and 215/45R17 roll within 0.3″ (1.2%) of each other in overall diameter, so they are interchangeable from a speedometer standpoint — the second size is an optional wheel package rather than a different rolling size.
Other 2012 Toyota Matrix trims
Toyota Matrix tire sizes by year
- 2013 Toyota Matrix 205/55R16
- 2011 Toyota Matrix 205/55R16
- 2010 Toyota Matrix 205/55R16
- 2009 Toyota Matrix 205/55R16
- 2008 Toyota Matrix 205/55R16
- 2007 Toyota Matrix 205/55R16
- 2006 Toyota Matrix 205/55R16
- 2005 Toyota Matrix 205/55R16
- 2004 Toyota Matrix 205/55R16
- 2003 Toyota Matrix 205/55R16
How to read a tire size
A tire size like 225/45R17 breaks down into three parts:
the first number is the section width in millimeters
(the tire's width from sidewall to sidewall), the second is the
aspect ratio — the sidewall's height as a percentage of
that width — and the number after the "R" is the rim
diameter in inches. A letter prefix (P or LT) indicates
Passenger or Light Truck construction; its absence usually means
Euro-metric sizing.
Some trucks and off-road tires instead use "flotation" sizing, like
37X12.50R17 — here the numbers are the tire's overall
diameter and width in inches directly, with the rim diameter last.
Always verify against the tire information placard on your driver's-side door jamb or your owner's manual before purchasing — tire size can vary by factory option package even within the same trim.